C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
Hi all,
tried to set up a new file derived from minimal in an
other dir than WXW\samples but didn't succeed bcs of
file path problems in mingw32-make and in vc12 (VS-2015).
So I ended up with C::B and tried to set up a new blank
wxWidgets project with wxSmith file ans wxFrame
(gcc 5.0.1, WXW 3.0.3, all Settings correct).
Tried to build it but got an error as shown below.
Could it be C::B doesn't work with WxW 3.0.3 or is it incapable to
work with gcc 5.0.1?!?
Any hint appreciated.
Thanks a lot - Regards - Volker
ERROR CODE SNIPPET:
.....
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\3.0.3_exe\lib\gcc_lib/libwxmsw30u_core.a(corelib_gdicmn.o):gdicmn.cpp:(.text+0x1c9f): undefined reference to `std::__cxx11::basic_string<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> >::_M_erase(unsigned int, unsigned int)'
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\3.0.3_exe\lib\gcc_lib/libwxmsw30u_core.a(corelib_gdicmn.o):gdicmn.cpp:(.text+0x2433): undefined reference to `std::__cxx11::basic_string<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> >::_M_erase(unsigned int, unsigned int)'
D:/_02_A_PROGS/_06_CODING/_00_IDEs/_04_CODE_BLOCKS/exe/CodeBlocks/MinGW/bin/../lib/gcc/mingw32/4.9.2/../../../../mingw32/bin/ld.exe: D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\3.0.3_exe\lib\gcc_lib/libwxmsw30u_core.a(corelib_gdicmn.o): bad reloc address 0x0 in section `.data'
D:/_02_A_PROGS/_06_CODING/_00_IDEs/_04_CODE_BLOCKS/exe/CodeBlocks/MinGW/bin/../lib/gcc/mingw32/4.9.2/../../../../mingw32/bin/ld.exe: final link failed: Invalid operation
tried to set up a new file derived from minimal in an
other dir than WXW\samples but didn't succeed bcs of
file path problems in mingw32-make and in vc12 (VS-2015).
So I ended up with C::B and tried to set up a new blank
wxWidgets project with wxSmith file ans wxFrame
(gcc 5.0.1, WXW 3.0.3, all Settings correct).
Tried to build it but got an error as shown below.
Could it be C::B doesn't work with WxW 3.0.3 or is it incapable to
work with gcc 5.0.1?!?
Any hint appreciated.
Thanks a lot - Regards - Volker
ERROR CODE SNIPPET:
.....
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\3.0.3_exe\lib\gcc_lib/libwxmsw30u_core.a(corelib_gdicmn.o):gdicmn.cpp:(.text+0x1c9f): undefined reference to `std::__cxx11::basic_string<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> >::_M_erase(unsigned int, unsigned int)'
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\3.0.3_exe\lib\gcc_lib/libwxmsw30u_core.a(corelib_gdicmn.o):gdicmn.cpp:(.text+0x2433): undefined reference to `std::__cxx11::basic_string<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> >::_M_erase(unsigned int, unsigned int)'
D:/_02_A_PROGS/_06_CODING/_00_IDEs/_04_CODE_BLOCKS/exe/CodeBlocks/MinGW/bin/../lib/gcc/mingw32/4.9.2/../../../../mingw32/bin/ld.exe: D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\3.0.3_exe\lib\gcc_lib/libwxmsw30u_core.a(corelib_gdicmn.o): bad reloc address 0x0 in section `.data'
D:/_02_A_PROGS/_06_CODING/_00_IDEs/_04_CODE_BLOCKS/exe/CodeBlocks/MinGW/bin/../lib/gcc/mingw32/4.9.2/../../../../mingw32/bin/ld.exe: final link failed: Invalid operation
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
Hi,
Which options did you pass when building the library?
Which options did you use in the C::B project?
Those 2 has to match exactly, with all other flags (C{XX}FLAGS and LDFLAGS).
Did you set the CXXFLAGS for that project to be "-std=c++11" or "-std=gnu++11" depending on how did you compile wxWidgets?
Thank you.
Which options did you pass when building the library?
Which options did you use in the C::B project?
Those 2 has to match exactly, with all other flags (C{XX}FLAGS and LDFLAGS).
Did you set the CXXFLAGS for that project to be "-std=c++11" or "-std=gnu++11" depending on how did you compile wxWidgets?
Thank you.
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
Hi Oneeyeman,
thanks for your reply.
Compiled the gcc lib with the following options:
mingw32-make -f makefile.gcc BUILD=release UNICODE=1 SHARED=0 CXXFLAGS="-std=gnu++11"
(seemed normal to me as I compiled with gcc)
Didn't set any additional options in C::B as I hoped this would do it himself.
Any further hint appreciated.
Thanks a lot - Regards - Volker
thanks for your reply.
Compiled the gcc lib with the following options:
mingw32-make -f makefile.gcc BUILD=release UNICODE=1 SHARED=0 CXXFLAGS="-std=gnu++11"
(seemed normal to me as I compiled with gcc)
Didn't set any additional options in C::B as I hoped this would do it himself.
Any further hint appreciated.
Thanks a lot - Regards - Volker
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
Hi,
I don't think C::B does set CXXFLAGS.
You need to find where it is in this IDE and set it.
I can't help you here since I'm using MSVC...
Thank you.
I don't think C::B does set CXXFLAGS.
You need to find where it is in this IDE and set it.
I can't help you here since I'm using MSVC...
Thank you.
-
- Super wx Problem Solver
- Posts: 466
- Joined: Tue Jun 20, 2006 6:47 pm
- Contact:
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
In codeblocks, you can add extra compiler options as follows:
1) From the menu, select Project->Build options...
2) On the "Compiler settings" tab, select the "Other compiler options" subtab.
3) Enter whatever extra options are needed
1) From the menu, select Project->Build options...
2) On the "Compiler settings" tab, select the "Other compiler options" subtab.
3) Enter whatever extra options are needed
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
Hi,
Shouldn't it be:
Thank you.
Shouldn't it be:
?CXXFLAGS=-std=c++11
Thank you.
-
- Super wx Problem Solver
- Posts: 466
- Joined: Tue Jun 20, 2006 6:47 pm
- Contact:
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
They said they built wxWidgets with the line
So I just added the same extra bit ("-std=gnu++11") to the other compiler options.
Code: Select all
mingw32-make -f makefile.gcc BUILD=release UNICODE=1 SHARED=0 CXXFLAGS="-std=gnu++11"
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
New Pagodi,
So you are saying that C::B is smart enough to prepend "CXXFLAGS" there?
Thank you.
So you are saying that C::B is smart enough to prepend "CXXFLAGS" there?
Thank you.
-
- Super wx Problem Solver
- Posts: 466
- Joined: Tue Jun 20, 2006 6:47 pm
- Contact:
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
Sorry, I misunderstood the question.
Codeblocks doesn't use make files. It just calls g++ (or whatever the particular flavor mingw calls it) with options based on whatever is checked in the compiler options tab. By default (with tdmgcc5.1.0) the build commands look something like:
Whatever is entered the "Other compiler options box" gets added to the command line verbatim. When you add "-std=gnu++11", the build command becomes:
If you type "The quick brown fox" in the extra compile options box, codeblocks will dutifully try to run the command:
but will error out almost immediately.
I guess one way to think about is that that particular box is the equivalent of the "CXXFLAGS=" option when using makefiles.
Codeblocks doesn't use make files. It just calls g++ (or whatever the particular flavor mingw calls it) with options based on whatever is checked in the compiler options tab. By default (with tdmgcc5.1.0) the build commands look something like:
Code: Select all
x86_64-w64-mingw32-g++.exe -pipe -mthreads -D__GNUWIN32__ -D__WXMSW__ -DwxUSE_UNICODE -Wall -O2 -I...
Code: Select all
x86_64-w64-mingw32-g++.exe -pipe -mthreads -D__GNUWIN32__ -D__WXMSW__ -DwxUSE_UNICODE -Wall -O2 -std=gnu++11 -I...
Code: Select all
x86_64-w64-mingw32-g++.exe -pipe -mthreads -D__GNUWIN32__ -D__WXMSW__ -DwxUSE_UNICODE -Wall -O2 The quick brown fox -I...
I guess one way to think about is that that particular box is the equivalent of the "CXXFLAGS=" option when using makefiles.
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
New Pagodi,
In this case I believe the text there should be:
If you have it installed, you can try it.
Thank you.
In this case I believe the text there should be:
because that's what should be passed to the compiler.CXXFLAGS=-std=c++11
If you have it installed, you can try it.
Thank you.
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
Please state what GCC version you think you are using?vcf wrote:Hi all,
tried to set up a new file derived from minimal in an
other dir than WXW\samples but didn't succeed bcs of
file path problems in mingw32-make and in vc12 (VS-2015).
So I ended up with C::B and tried to set up a new blank
wxWidgets project with wxSmith file ans wxFrame
(gcc 5.0.1, WXW 3.0.3, all Settings correct).
Tried to build it but got an error as shown below.
Could it be C::B doesn't work with WxW 3.0.3 or is it incapable to
work with gcc 5.0.1?!?
Any hint appreciated.
Thanks a lot - Regards - Volker
ERROR CODE SNIPPET:
.....
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\3.0.3_exe\lib\gcc_lib/libwxmsw30u_core.a(corelib_gdicmn.o):gdicmn.cpp:(.text+0x1c9f): undefined reference to `std::__cxx11::basic_string<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> >::_M_erase(unsigned int, unsigned int)'
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\3.0.3_exe\lib\gcc_lib/libwxmsw30u_core.a(corelib_gdicmn.o):gdicmn.cpp:(.text+0x2433): undefined reference to `std::__cxx11::basic_string<wchar_t, std::char_traits<wchar_t>, std::allocator<wchar_t> >::_M_erase(unsigned int, unsigned int)'
D:/_02_A_PROGS/_06_CODING/_00_IDEs/_04_CODE_BLOCKS/exe/CodeBlocks/MinGW/bin/../lib/gcc/mingw32/4.9.2/../../../../mingw32/bin/ld.exe: D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\3.0.3_exe\lib\gcc_lib/libwxmsw30u_core.a(corelib_gdicmn.o): bad reloc address 0x0 in section `.data'
D:/_02_A_PROGS/_06_CODING/_00_IDEs/_04_CODE_BLOCKS/exe/CodeBlocks/MinGW/bin/../lib/gcc/mingw32/4.9.2/../../../../mingw32/bin/ld.exe: final link failed: Invalid operation
I have read 5.0.1 and 5.1.0; but, your log shows 4.9.2.
You need to build wxWidgets with the same compiler you are using to develop your program.
Tim S.
- xaviou
- Super wx Problem Solver
- Posts: 437
- Joined: Mon Aug 21, 2006 3:18 pm
- Location: Annecy - France
- Contact:
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
Hi
And even if the libs were built with this option, it is not mandatory to use it when building the application if yo udon't use c++11 specific code (tested).
Regards
Xav'
I do not agree with you : the libs were build with "CXXFLAGS=-std=gnu++11" not "CXXFLAGS=-std=c++11"ONEEYEMAN wrote:New Pagodi,
In this case I believe the text there should be:
because that's what should be passed to the compiler.CXXFLAGS=-std=c++11
If you have it installed, you can try it.
Thank you.
And even if the libs were built with this option, it is not mandatory to use it when building the application if yo udon't use c++11 specific code (tested).
Regards
Xav'
My wxWidgets stuff web page : X@v's wxStuff
-
- In need of some credit
- Posts: 4
- Joined: Tue Nov 21, 2017 3:48 pm
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
Hi all,
first of all thanks for all the answers to this topic.
Would also say that when I used -std=gnu++11 for the libs
I MUST use it for the code compilation.
Will clean my system (see below) and will try to place the
CXXFLAGS into C::B looking forward what will happen.
@stahta01:
You are right - during the whole hurdles I messed up the gcc versions
when I tried to "downgrade" to WxW 2.8.X and with this not really
intentionally I brought the gcc 4.9.2 into the paths.
CMD window gcc - v gives 5.0.1 that shipped with my first "downgrade"
(I used gcc 7.0.1).
For sure you are right that libs and code MUST be made by the same compiler
version.
Will try to fix this during the day.
Once more thanks a lot - Regards - Volker
first of all thanks for all the answers to this topic.
Would also say that when I used -std=gnu++11 for the libs
I MUST use it for the code compilation.
Will clean my system (see below) and will try to place the
CXXFLAGS into C::B looking forward what will happen.
@stahta01:
You are right - during the whole hurdles I messed up the gcc versions
when I tried to "downgrade" to WxW 2.8.X and with this not really
intentionally I brought the gcc 4.9.2 into the paths.
CMD window gcc - v gives 5.0.1 that shipped with my first "downgrade"
(I used gcc 7.0.1).
For sure you are right that libs and code MUST be made by the same compiler
version.
Will try to fix this during the day.
Once more thanks a lot - Regards - Volker
-
- In need of some credit
- Posts: 4
- Joined: Tue Nov 21, 2017 3:48 pm
Re: C::B WxW 3.0.3 gcc 5.0.1 problems (undef ref / bad reloc)
Hi all,
meanwhile I fixed the comp version problem but to be honest didn't get really one step
further as I still run in bad rloc problems.
Meanwhile I use definiteley gcc 5.1.0 and WXW 2.8.6
(compiled with
mingw32-make -f makefile.gcc BUILD=release UNICODE=1 SHARED=0 CXXFLAGS="-std=gnu++11" )
I set the compiler toolchain tab path to
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_02_MinGW64\_02_TDM_GCC_5.1.0\exe
and took all of the needed progc (mingw32-gcc-5.1.0.exe, ar, mingw32-make etc. from this dir).
Placed the CXXFLAGS="-std=gnu++11" in the "Other Compiler Options" as I cannot
mark it in the Compiler Flags.
Tried also CXXFLAGS=-std=c++11 in comp options and also in comp flags.
Ended up with the problem below. Seems the build doesn't recognize the CXXFLAGS .
Thougt maybe its a problem of mixed c/c++ code bcz of the undefined ... messages?!?
... If so how to resolve
(IMHO mingw32-gcc-5.1.0.exe should be able to deal with c-parts of the code?!)
What about the double section and different size complains of the comp?
Any hint appreciated. Thanks a lot - Regards - Volker
Below snippets of the build echo and the build error:
-------------- Build: Release in WXW-2.8.6_CB_TEST-01 (compiler: GNU GCC 5.1.0 (TDM) Compiler)---------------
mingw32-gcc-5.1.0.exe -LD:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\2.8.6_exe\lib\gcc_lib -o bin\Release\WXW-2.8.exe obj\Release\WXW_2_8_6_CB_TEST_01App.o obj\Release\WXW_2_8_6_CB_TEST_01Main.o obj\Release\resource.res -s -lwxmsw28u_core -lwxbase28u -lwxpng -lwxzlib -mwindows
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\2.8.6_exe\lib\gcc_lib/libwxmsw28u_core.a(corelib_app.o): duplicate section `.rdata$_ZTV20wxThreadHelperThread[__ZTV20wxThreadHelperThread]' has different size
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\2.8.6_exe\lib\gcc_lib/libwxmsw28u_core.a(corelib_main.o): duplicate section `.rdata$_ZTV20wxThreadHelperThread[__ZTV20wxThreadHelperThread]' has different size
........... and here the final "showdown":
:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\2.8.6_exe\lib\gcc_lib/libwxbase28u.a(baselib_regconf.o): duplicate section `.rdata$_ZTV20wxThreadHelperThread[__ZTV20wxThreadHelperThread]' has different size
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\2.8.6_exe\lib\gcc_lib/libwxbase28u.a(baselib_dde.o): duplicate section `.rdata$_ZTV20wxThreadHelperThread[__ZTV20wxThreadHelperThread]' has different size
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0xc): undefined reference to `__gxx_personality_sj0'
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0x58): undefined reference to `operator new(unsigned int)'
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0x9e): undefined reference to `operator delete(void*)'
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0xcf): undefined reference to `__gxx_personality_sj0'
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0x106): undefined reference to `operator new(unsigned int)'
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0x17b): undefined reference to `operator delete(void*)'
D:/_02_A_PROGS/_06_CODING/_00_IDEs/_02_MinGW64/_02_TDM_GCC_5.1.0/exe/bin/../lib/gcc/mingw32/5.1.0/../../../../mingw32/bin/ld.exe: obj\Release\WXW_2_8_6_CB_TEST_01App.o: bad reloc address 0x2 in section `.text$_ZN23WXW_2_8_6_CB_TEST_01AppD1Ev[__ZN23WXW_2_8_6_CB_TEST_01AppD1Ev]'
D:/_02_A_PROGS/_06_CODING/_00_IDEs/_02_MinGW64/_02_TDM_GCC_5.1.0/exe/bin/../lib/gcc/mingw32/5.1.0/../../../../mingw32/bin/ld.exe: final link failed: Invalid operation
meanwhile I fixed the comp version problem but to be honest didn't get really one step
further as I still run in bad rloc problems.
Meanwhile I use definiteley gcc 5.1.0 and WXW 2.8.6
(compiled with
mingw32-make -f makefile.gcc BUILD=release UNICODE=1 SHARED=0 CXXFLAGS="-std=gnu++11" )
I set the compiler toolchain tab path to
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_02_MinGW64\_02_TDM_GCC_5.1.0\exe
and took all of the needed progc (mingw32-gcc-5.1.0.exe, ar, mingw32-make etc. from this dir).
Placed the CXXFLAGS="-std=gnu++11" in the "Other Compiler Options" as I cannot
mark it in the Compiler Flags.
Tried also CXXFLAGS=-std=c++11 in comp options and also in comp flags.
Ended up with the problem below. Seems the build doesn't recognize the CXXFLAGS .
Thougt maybe its a problem of mixed c/c++ code bcz of the undefined ... messages?!?
... If so how to resolve
(IMHO mingw32-gcc-5.1.0.exe should be able to deal with c-parts of the code?!)
What about the double section and different size complains of the comp?
Any hint appreciated. Thanks a lot - Regards - Volker
Below snippets of the build echo and the build error:
-------------- Build: Release in WXW-2.8.6_CB_TEST-01 (compiler: GNU GCC 5.1.0 (TDM) Compiler)---------------
mingw32-gcc-5.1.0.exe -LD:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\2.8.6_exe\lib\gcc_lib -o bin\Release\WXW-2.8.exe obj\Release\WXW_2_8_6_CB_TEST_01App.o obj\Release\WXW_2_8_6_CB_TEST_01Main.o obj\Release\resource.res -s -lwxmsw28u_core -lwxbase28u -lwxpng -lwxzlib -mwindows
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\2.8.6_exe\lib\gcc_lib/libwxmsw28u_core.a(corelib_app.o): duplicate section `.rdata$_ZTV20wxThreadHelperThread[__ZTV20wxThreadHelperThread]' has different size
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\2.8.6_exe\lib\gcc_lib/libwxmsw28u_core.a(corelib_main.o): duplicate section `.rdata$_ZTV20wxThreadHelperThread[__ZTV20wxThreadHelperThread]' has different size
........... and here the final "showdown":
:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\2.8.6_exe\lib\gcc_lib/libwxbase28u.a(baselib_regconf.o): duplicate section `.rdata$_ZTV20wxThreadHelperThread[__ZTV20wxThreadHelperThread]' has different size
D:\_02_A_PROGS\_06_CODING\_00_IDEs\_03_wx_WIDGETS\2.8.6_exe\lib\gcc_lib/libwxbase28u.a(baselib_dde.o): duplicate section `.rdata$_ZTV20wxThreadHelperThread[__ZTV20wxThreadHelperThread]' has different size
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0xc): undefined reference to `__gxx_personality_sj0'
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0x58): undefined reference to `operator new(unsigned int)'
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0x9e): undefined reference to `operator delete(void*)'
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0xcf): undefined reference to `__gxx_personality_sj0'
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0x106): undefined reference to `operator new(unsigned int)'
obj\Release\WXW_2_8_6_CB_TEST_01App.o:WXW_2_8_6_CB_TEST_01App.cpp:(.text+0x17b): undefined reference to `operator delete(void*)'
D:/_02_A_PROGS/_06_CODING/_00_IDEs/_02_MinGW64/_02_TDM_GCC_5.1.0/exe/bin/../lib/gcc/mingw32/5.1.0/../../../../mingw32/bin/ld.exe: obj\Release\WXW_2_8_6_CB_TEST_01App.o: bad reloc address 0x2 in section `.text$_ZN23WXW_2_8_6_CB_TEST_01AppD1Ev[__ZN23WXW_2_8_6_CB_TEST_01AppD1Ev]'
D:/_02_A_PROGS/_06_CODING/_00_IDEs/_02_MinGW64/_02_TDM_GCC_5.1.0/exe/bin/../lib/gcc/mingw32/5.1.0/../../../../mingw32/bin/ld.exe: final link failed: Invalid operation