Hey guys, i am new here, and I try to understand project development with wxdevc++.
My version is 7.4.2.569 bs windows 8.
I am working with the book "Programming with wxDev++",
and i am busy with the HTMLEdit project.
So far so good.
But the integrated dialogs disappear next project loading.
I integrated them again with the project inspector or built new,
then it worked, next time loading, not to find.
I like the work with the ide, but it is frustrating.
Thanks a lot, if anybody knows what to do.
Greets Michael
wxdevc++ dialogs disappear
-
- In need of some credit
- Posts: 8
- Joined: Mon Jun 15, 2015 11:00 pm
-
- In need of some credit
- Posts: 8
- Joined: Mon Jun 15, 2015 11:00 pm
Re: wxdevc++ dialogs disappear, ide does not work anymore
After re adding the dialogs with "project -> add", the dialogs are still there,
that i could continue the work .
At last, i had a run time error, since that, ide had process (access) violations
every time loading any project (ofcourse i switched off the computer between).
And now ide doesn' t work anymore.
Should I reinstall ? Other ideas ?
Thx Michael
that i could continue the work .
At last, i had a run time error, since that, ide had process (access) violations
every time loading any project (ofcourse i switched off the computer between).
And now ide doesn' t work anymore.
Should I reinstall ? Other ideas ?
Thx Michael
-
- Earned some good credits
- Posts: 113
- Joined: Sat Sep 24, 2011 9:32 pm
- Location: Poland
Re: wxdevc++ dialogs disappear
Mayby you can try to use older version. I still use 7.3.1 version. I have started to use 7.3.1 on Windows XP. Now I am still running 7.3.1 on Windows 8.1, generaly with out any bigger troubles. Of coures my projects are quite small programms. Good luck. Regards, Jarek
-
- In need of some credit
- Posts: 8
- Joined: Mon Jun 15, 2015 11:00 pm
Re: wxdevc++ dialogs disappear
Good Idea.I reinstalled the actual version, the same problems,
every project, access violation.
I tried code:blocks, but it doesnt work with wxwidget lib,
i would have to compile the sources of them,someone wrote.
Its hard to find an easy and good running system, i think.
Many thanks for your answer.
Michael
every project, access violation.
I tried code:blocks, but it doesnt work with wxwidget lib,
i would have to compile the sources of them,someone wrote.
Its hard to find an easy and good running system, i think.
Many thanks for your answer.
Michael
-
- Earned some good credits
- Posts: 113
- Joined: Sat Sep 24, 2011 9:32 pm
- Location: Poland
Re: wxdevc++ dialogs disappear
Some people use Code::Blocks with wxWidget (manaully installed) and wxSmith plugin (this is RAD designer for forms and dialogs). More info in other subforums for example "Compiler / Linking / IDE Related". Regards, Jarek
-
- In need of some credit
- Posts: 8
- Joined: Mon Jun 15, 2015 11:00 pm
Re: wxdevc++ dialogs disappear
Yes, thanks.
I think i have no other chance to try it with code::blocks, wxdevc++ 7.3.1 does not work too.
I tried code::blocks with manually wxwidgets binary libs, so the message appeared
"a matching release configuration cannot be found in the wxWidget directory".
With the complete message I found a code::blocks forum entry,
which means that it doent work with the binary libs, so i would have to load the source code
and compile it with special flags.
Is it this, you meant?:
viewtopic.php?f=19&t=40437
Greets Michael
I think i have no other chance to try it with code::blocks, wxdevc++ 7.3.1 does not work too.
I tried code::blocks with manually wxwidgets binary libs, so the message appeared
"a matching release configuration cannot be found in the wxWidget directory".
With the complete message I found a code::blocks forum entry,
which means that it doent work with the binary libs, so i would have to load the source code
and compile it with special flags.
Is it this, you meant?:
viewtopic.php?f=19&t=40437
Greets Michael
-
- Earned some good credits
- Posts: 113
- Joined: Sat Sep 24, 2011 9:32 pm
- Location: Poland
Re: wxdevc++ dialogs disappear
Yes, you have found correct topic.
wxDevC++ 7.3.1.3 for sure works fine even on windows 8.1. Something is wrong installed or you have not removed all from previous installation. Try to install via full installer from here:
http://sourceforge.net/projects/wxdsgn/ ... rsion%207/
Regards, Jarek
wxDevC++ 7.3.1.3 for sure works fine even on windows 8.1. Something is wrong installed or you have not removed all from previous installation. Try to install via full installer from here:
http://sourceforge.net/projects/wxdsgn/ ... rsion%207/
Regards, Jarek
-
- In need of some credit
- Posts: 8
- Joined: Mon Jun 15, 2015 11:00 pm
Re: wxdevc++ dialogs disappear
Thank you Jarek, I downloaded the full installer, you advised.
I think too, there are some rests of the old installation,
because i tried to load a simple project, and it failed the same way.
But I used the official deinstallation, and the folder was clear.
Meanwhile I got code::form to run with wxwidgets, after more than 90 min compiling (lame duck laptop?).
I could create a little frame with buttons, but I need the custom gcc dll in the release
folder.Static lib does not work, i think i have to compile again with another shared flag?
OK, its late now.
Good night
Michael
I think too, there are some rests of the old installation,
because i tried to load a simple project, and it failed the same way.
But I used the official deinstallation, and the folder was clear.
Meanwhile I got code::form to run with wxwidgets, after more than 90 min compiling (lame duck laptop?).
I could create a little frame with buttons, but I need the custom gcc dll in the release
folder.Static lib does not work, i think i have to compile again with another shared flag?
OK, its late now.
Good night
Michael