Cannot open include file: 'wx/setup.h' using Win installer Topic is solved
-
- Super wx Problem Solver
- Posts: 347
- Joined: Wed Nov 02, 2005 10:33 am
Cannot open include file: 'wx/setup.h' using Win installer
I just uninstalled MSVC 2008 and my old WxWidgets-2.8.11. I install MSVC 2010 and grab the 2.9.3 exe installer (Windows installer) for the build stuff. So, I load up everything and do a batch build and I get 18 failures due to that message. I look in the headers and that sucker is for the Unix build but this is the MSW build/MSW exe so what gives? I tried to comment it out and it gave even more errors.
How do I fix this?
Thanks.
How do I fix this?
Thanks.
Re: Cannot open include file: 'wx/setup.h' using Win install
Is that VS2010 express? AFAIR the express version can't build 2.9.x (technically it could, but it doesn't convert the project files correctly).
Also, the latest version is 2.9.4.
Also, the latest version is 2.9.4.
Use the source, Luke!
-
- Super wx Problem Solver
- Posts: 347
- Joined: Wed Nov 02, 2005 10:33 am
Re: Cannot open include file: 'wx/setup.h' using Win install
2.9.4 would not download as it gave an error in the right hand corner of the download page and said to try another version.
This is not express this is Ultimate.
This is not express this is Ultimate.
Re: Cannot open include file: 'wx/setup.h' using Win install
Try the zip-archive. The installer doesn't do much anyway.
Use the source, Luke!
-
- Super wx Problem Solver
- Posts: 347
- Joined: Wed Nov 02, 2005 10:33 am
Re: Cannot open include file: 'wx/setup.h' using Win install
Grabbed 2.9.4 zip and I have a ton of warnings (like this "warning MSB8012: TargetPath(C:\wxWidgets-2.9.4\build\msw\.\..\..\lib\vc_lib\wxregex.lib) does not match the Library's OutputFile property value (C:\wxWidgets-2.9.4\lib\vc_lib\wxregexu.lib). This may cause your project to build incorrectly. To correct this, please make sure that $(OutDir), $(TargetName) and $(TargetExt) property values match the value specified in %(Lib.OutputFile).") but no errors. ========== Rebuild All: 23 succeeded, 0 failed, 0 skipped ==========
Something is wrong with that installer version.
Alright I think that warning above has to be corrected and I have no idea how because no matter what I do wxwidgets is forced to be built in Unicode release build so my flags I am telling it are not working.
HELP, lol. :/
Grrrr, MSVC 10 is what is causing this as I never had this issue before.
After digging around I found this (I so hate MS with each release of VS they do and MSVS 2012 from what I have read is very bad if you like C++ as MSVS 2010 started this trend):
Fixed that warning by going into the librarian and telling it to inherit from project (something new to 2010) but my compile issues still exist with it forcing me to Unicode regardless what I set.
Something is wrong with that installer version.
Alright I think that warning above has to be corrected and I have no idea how because no matter what I do wxwidgets is forced to be built in Unicode release build so my flags I am telling it are not working.
HELP, lol. :/
Grrrr, MSVC 10 is what is causing this as I never had this issue before.
After digging around I found this (I so hate MS with each release of VS they do and MSVS 2012 from what I have read is very bad if you like C++ as MSVS 2010 started this trend):
They sure do love to fiddle but I am unsure if this is what is causing me to be in Unicode release no matter what I put the flags to or not.About the original bug the warning is generated because in Visual Studio 2010 we have moved the C++ build system to be based on MSBuild. In earlier versions of Visual Studio when you changed the output file property the "TargetName" "TargetExt" properties were changed in background by the product itself. In this release we dont have that functionality and we have now become more transparent and warn the user to make sure that the output file property does match with the "OutDir" "TargetName" and "TargetExt" properties.
Your can change %(lib.outputfile) by going to project properties "Configuration Properties->Librarian->Output File".
Fixed that warning by going into the librarian and telling it to inherit from project (something new to 2010) but my compile issues still exist with it forcing me to Unicode regardless what I set.
Re: Cannot open include file: 'wx/setup.h' using Win install
If you don't want Unicode (why?), find this line in setup.h, change the value to 0 and do a clean rebuild of the library.
Code: Select all
#define wxUSE_UNICODE 1
Use the source, Luke!
Re: Cannot open include file: 'wx/setup.h' using Win install
BTW: You can also build from the command line using Visual Studio, then you don't have the issue with the not properly converted project files.
Use the source, Luke!
-
- Super wx Problem Solver
- Posts: 347
- Joined: Wed Nov 02, 2005 10:33 am
Re: Cannot open include file: 'wx/setup.h' using Win install
I did that and it still gives me the Unicode release only build.doublemax wrote:If you don't want Unicode (why?), find this line in setup.h, change the value to 0 and do a clean rebuild of the library.Code: Select all
#define wxUSE_UNICODE 1
-
- Super wx Problem Solver
- Posts: 347
- Joined: Wed Nov 02, 2005 10:33 am
Re: Cannot open include file: 'wx/setup.h' using Win install
My files are now converted properly with something new 2010 demands (as I printed above) but it will not abide by any switches AND when I tell it to convert all to multi-byte builds it doesn't matter.doublemax wrote:BTW: You can also build from the command line using Visual Studio, then you don't have the issue with the not properly converted project files.
Re: Cannot open include file: 'wx/setup.h' using Win install
And how do you determine that? As it's just a flag and not a separate compiler configuration, the filenames of the libraries won't change, so they will still have the 'U' in them.I did that and it still gives me the Unicode release only build.
Use the source, Luke!
-
- Super wx Problem Solver
- Posts: 347
- Joined: Wed Nov 02, 2005 10:33 am
Re: Cannot open include file: 'wx/setup.h' using Win install
You can tell that by the directory in which they are created.doublemax wrote:And how do you determine that? As it's just a flag and not a separate compiler configuration, the filenames of the libraries won't change, so they will still have the 'U' in them.I did that and it still gives me the Unicode release only build.
I fixed it btw as it has been so long since I created a wxWidgets (always just used my build from 2010) that I went into the nmake and remembered that I needed to change makefile.vc to makefile (thanks for the command line suggestion or I would not have remembered this).
I will say I cannot get 2010 to obey me in the ide when compiling as it refuses. Nmake with my config - vc_msw IDE (with all of my changes) - vc_mswu
Why is 2010 doing this?
-
- Super wx Problem Solver
- Posts: 347
- Joined: Wed Nov 02, 2005 10:33 am
Re: Cannot open include file: 'wx/setup.h' using Win install
I think I am going to go back to 2008 because frankly I no longer have the patience I once had.
C:\wxWidgets-2.9.4\include\wx/platform.h(154): fatal error C1083: Cannot open include file: 'wx/setup.h': No such file or directory
That is what I get compiling a program. Again, it thinks I am on Unix.
C:\wxWidgets-2.9.4\include\wx/platform.h(154): fatal error C1083: Cannot open include file: 'wx/setup.h': No such file or directory
That is what I get compiling a program. Again, it thinks I am on Unix.
Re: Cannot open include file: 'wx/setup.h' using Win install
What program? Yours of one of the samples? And what does this have to do with Unix?That is what I get compiling a program. Again, it thinks I am on Unix.
Anyway, if the libraries build successfully, it's probably just a simple issue of wrong include path, especially since you messed with the Unicode configuration.
Check the include path(s) and see if setup.h is there.
Use the source, Luke!
Re: Cannot open include file: 'wx/setup.h' using Win install
This is the exact error I would get with MSVC 2008 Express, had I not built the library successfully and didn't addDark Alchemist wrote:C:\wxWidgets-2.9.4\include\wx/platform.h(154): fatal error C1083: Cannot open include file: 'wx/setup.h': No such file or directory
Code: Select all
"$(WXWIN)\lib\vc_lib\mswud"
-
- Super wx Problem Solver
- Posts: 347
- Joined: Wed Nov 02, 2005 10:33 am
Re: Cannot open include file: 'wx/setup.h' using Win install
To answer you doublemax what does this have to do with Unix? This...doublemax wrote:What program? Yours of one of the samples? And what does this have to do with Unix?That is what I get compiling a program. Again, it thinks I am on Unix.
Anyway, if the libraries build successfully, it's probably just a simple issue of wrong include path, especially since you messed with the Unicode configuration.
Check the include path(s) and see if setup.h is there.
Code: Select all
/*
Include wx/setup.h for the Unix platform defines generated by configure and
the library compilation options
Note that it must be included before defining hardware symbols below as they
could be already defined by configure
*/
#include "wx/setup.h"
Now, I do have new errors though but if I remember right these used to be a simple fix but nothing is simple anymore in Microcrap land and I can't remember what the fix was.
Code: Select all
1>msvcprt.lib(MSVCP100.dll) : error LNK2005: "void __cdecl std::_Xlength_error(char const *)" (?_Xlength_error@std@@YAXPBD@Z) already defined in libcpmt.lib(xthrow.obj)
1>msvcprt.lib(MSVCP100.dll) : error LNK2005: "void __cdecl std::_Xout_of_range(char const *)" (?_Xout_of_range@std@@YAXPBD@Z) already defined in libcpmt.lib(xthrow.obj)
1>msvcprt.lib(MSVCP100.dll) : error LNK2005: "protected: char * __thiscall std::basic_streambuf<char,struct std::char_traits<char> >::pptr(void)const " (?pptr@?$basic_streambuf@DU?$char_traits@D@std@@@std@@IBEPADXZ) already defined in 1Frm.obj
1>msvcprt.lib(MSVCP100.dll) : error LNK2005: "public: virtual __thiscall std::basic_streambuf<char,struct std::char_traits<char> >::~basic_streambuf<char,struct std::char_traits<char> >(void)" (??1?$basic_streambuf@DU?$char_traits@D@std@@@std@@UAE@XZ) already defined in 1Frm.obj
1>msvcprt.lib(MSVCP100.dll) : error LNK2005: "protected: char * __thiscall std::basic_streambuf<char,struct std::char_traits<char> >::gptr(void)const " (?gptr@?$basic_streambuf@DU?$char_traits@D@std@@@std@@IBEPADXZ) already defined in 1Frm.obj
1>msvcprt.lib(MSVCP100.dll) : error LNK2005: "protected: void __thiscall std::basic_streambuf<char,struct std::char_traits<char> >::pbump(int)" (?pbump@?$basic_streambuf@DU?$char_traits@D@std@@@std@@IAEXH@Z) already defined in 1Frm.obj
1>msvcprt.lib(MSVCP100.dll) : error LNK2005: "protected: void __thiscall std::basic_streambuf<char,struct std::char_traits<char> >::gbump(int)" (?gbump@?$basic_streambuf@DU?$char_traits@D@std@@@std@@IAEXH@Z) already defined in 1Frm.obj
1>msvcprt.lib(MSVCP100.dll) : error LNK2005: "protected: __thiscall std::basic_streambuf<char,struct std::char_traits<char> >::basic_streambuf<char,struct std::char_traits<char> >(void)" (??0?$basic_streambuf@DU?$char_traits@D@std@@@std@@IAE@XZ) already defined in 1Frm.obj
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _free already defined in LIBCMT.lib(free.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: "public: __thiscall std::exception::exception(char const * const &)" (??0exception@std@@QAE@ABQBD@Z) already defined in LIBCMT.lib(stdexcpt.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: "public: virtual __thiscall std::exception::~exception(void)" (??1exception@std@@UAE@XZ) already defined in LIBCMT.lib(stdexcpt.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _memmove already defined in LIBCMT.lib(memmove.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: "public: __thiscall std::exception::exception(class std::exception const &)" (??0exception@std@@QAE@ABV01@@Z) already defined in LIBCMT.lib(stdexcpt.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _exit already defined in LIBCMT.lib(crt0dat.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _abort already defined in LIBCMT.lib(abort.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _malloc already defined in LIBCMT.lib(malloc.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: __strtol_l already defined in LIBCMT.lib(strtol.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: __strtoul_l already defined in LIBCMT.lib(strtol.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _realloc already defined in LIBCMT.lib(realloc.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: __stricmp already defined in LIBCMT.lib(stricmp.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _strpbrk already defined in LIBCMT.lib(strpbrk.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _strtol already defined in LIBCMT.lib(strtol.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _strtoul already defined in LIBCMT.lib(strtol.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: __strtoi64 already defined in LIBCMT.lib(strtoq.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: __strtoui64 already defined in LIBCMT.lib(strtoq.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _iswalpha already defined in LIBCMT.lib(_wctype.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _iswdigit already defined in LIBCMT.lib(_wctype.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _iswspace already defined in LIBCMT.lib(_wctype.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: __errno already defined in LIBCMT.lib(dosmap.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: "public: bool __thiscall type_info::operator==(class type_info const &)const " (??8type_info@@QBE_NABV0@@Z) already defined in LIBCMT.lib(typinfo.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _iswalnum already defined in LIBCMT.lib(_wctype.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _setlocale already defined in LIBCMT.lib(setlocal.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _isalnum already defined in LIBCMT.lib(_ctype.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _isalpha already defined in LIBCMT.lib(_ctype.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _isdigit already defined in LIBCMT.lib(_ctype.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _isspace already defined in LIBCMT.lib(_ctype.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: __create_locale already defined in LIBCMT.lib(setlocal.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: __free_locale already defined in LIBCMT.lib(setlocal.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _strncmp already defined in LIBCMT.lib(strncmp.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: "public: bool __thiscall type_info::operator!=(class type_info const &)const " (??9type_info@@QBE_NABV0@@Z) already defined in LIBCMT.lib(typinfo.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _iswprint already defined in LIBCMT.lib(_wctype.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _tolower already defined in LIBCMT.lib(tolower.obj)
1>MSVCRT.lib(ti_inst.obj) : error LNK2005: "private: __thiscall type_info::type_info(class type_info const &)" (??0type_info@@AAE@ABV0@@Z) already defined in LIBCMT.lib(typinfo.obj)
1>MSVCRT.lib(ti_inst.obj) : error LNK2005: "private: class type_info & __thiscall type_info::operator=(class type_info const &)" (??4type_info@@AAEAAV0@ABV0@@Z) already defined in LIBCMT.lib(typinfo.obj)
1>MSVCRT.lib(MSVCR100.dll) : error LNK2005: _ldexp already defined in LIBCMT.lib(_ldexp_.obj)
1>LINK : warning LNK4098: defaultlib 'MSVCRT' conflicts with use of other libs; use /NODEFAULTLIB:library
1>1App.obj : error LNK2001: unresolved external symbol "public: virtual bool __thiscall wxApp::Initialize(int &,wchar_t * *)" (?Initialize@wxApp@@UAE_NAAHPAPA_W@Z)
1>1App.obj : error LNK2001: unresolved external symbol "public: virtual void __thiscall wxAppConsoleBase::OnAssert(wchar_t const *,int,wchar_t const *,wchar_t const *)" (?OnAssert@wxAppConsoleBase@@UAEXPB_WH00@Z)
1>1App.obj : error LNK2001: unresolved external symbol "public: virtual void __thiscall wxAppConsoleBase::OnAssertFailure(wchar_t const *,int,wchar_t const *,wchar_t const *,wchar_t const *)" (?OnAssertFailure@wxAppConsoleBase@@UAEXPB_WH000@Z)
1>1Frm.obj : error LNK2001: unresolved external symbol "wchar_t const * const wxEmptyString" (?wxEmptyString@@3PB_WB)
1>1Frm.obj : error LNK2001: unresolved external symbol "private: static struct wxString::SubstrBufFromType<class wxScopedCharTypeBuffer<wchar_t> > __cdecl wxString::ConvertStr(char const *,unsigned int,class wxMBConv const &)" (?ConvertStr@wxString@@CA?AU?$SubstrBufFromType@V?$wxScopedCharTypeBuffer@_W@@@1@PBDIABVwxMBConv@@@Z)
1>1Frm.obj : error LNK2001: unresolved external symbol "void __cdecl wxOnAssert(char const *,int,char const *,char const *,wchar_t const *)" (?wxOnAssert@@YAXPBDH00PB_W@Z)
1>wxmsw29_core.lib(corelib_uuid.obj) : error LNK2001: unresolved external symbol __imp__UuidToStringA@8
1>wxmsw29_core.lib(corelib_uuid.obj) : error LNK2001: unresolved external symbol __imp__RpcStringFreeA@4
1>wxmsw29_core.lib(corelib_uuid.obj) : error LNK2001: unresolved external symbol __imp__UuidCreate@4
1>wxmsw29_core.lib(corelib_uuid.obj) : error LNK2001: unresolved external symbol __imp__UuidFromStringA@8